Live Instructor Led Online Training Computer Hardware II courses is delivered using an interactive remote desktop! .
During the course each participant will be able to perform Computer Hardware II exercises on their remote desktop provided by Qwikcourse.
Select among the courses listed in the category that really interests you.
If you are interested in learning the course under this category, click the "Book" button and purchase the course. Select your preferred schedule at least 5 days ahead. You will receive an email confirmation and we will communicate with trainer of your selected course.
Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.
The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.
Drivers and daemon for using iSCSI (SCSI over IP) on Linux. For Linux kernels 2.6.11 and above, use open-iscsi.org. For the 2.6.9 and 2.4 kernels, use the RHEL4 and RHEL3 CDs respectively. The 4.0.2 version here will work on the 2.6.10 kernel only.
open2300 - reads/writes data from the Lacrosse WS2300 family of weather stations. Includes tools that send data to: logfiles, webpages with graphs, XML file, MySQL, Weather Underground, Citizen Weather. Library of 50+ functions for your own programs (C)
fully modular opensource firmware for the ez430 chronos
openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).
PLMtools is a suite of home automation utilites that provide a low level interface to the Insteon Power Line Modem (PLM). Example shell scripts providing a higher level interface are also included.
Simple and small user-space interface daemons to AVR micro-controllers found in embedded NASes (like the Kuroboxes or Linkstations). It provides macro'd power on/off events, user control over button and fault events.
rtcan is a set of functions written in C which allow the transmission and reception of Controller Area Network (CAN) messages using the Real Time Application Interface (RTAI) on linux systems with the necessary CAN hardware.
Modeline calculator implementing the Coordinated Video Timing and the General Timing Formula standards put forth by VESA (Video Electronics Standards Association).
Compatibility library/layer for USB (serial-type) to GPIB interface, a C-based library with Linux-GPIB and NI-type library calls such as ibrd() and ibwrt(). Includes LabView VIs modeled on those in the standard 488 interface l Works with/compiled for Linux and Windows
Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Requires ACPI.
Use the Belkin Nostromo N50 Speedpad on VISTA,7 and XP 32/64. No need to install drivers,plug the device and use it ! Normal/Red/Green/Blue prog levels supported ! Download the file that matches your OS in the "Files" section. GPLv3 (Source code)
This project is a POSIX-compliant driver for the dgt board from dgtprojects. It is intented at acting as a layer between chess engines and the dgt board.
This is a front end to the Sony Programmable I/O Control Device Driver. This spicctrl is used for configuring screen brightness, getting battery status, getting ac status, etc...
tpm4java is a java-library which makes it easy to use your trusted plattform module (tpm chip) in your java applications. A tpm chip offers a random number generator, a secure keystore, an rsa-engine and some other cryptographic functionality.
Allows use of the PS3 version of the uDraw tablet in Windows 7.
The PS3 version of the uDraw tablet uses a USB dongle which is recognized as an HID device in Windows. Drivers are installed automatically but don't do anything. This application translates the tablet actions to mouse actions. See the wiki for more information. Thanks to Brandon Wilson for reverse-engineering the tablet and for providing the uDrawTabletLib.
UniPIC is a GTK programmer software for PIC programmers based on Brian Lane\'s software that supports at least PIC16C84 and PIC16F84. It works with the parallel port and by default with microPIC Trainer.
Program to search and update the newest drivers for your system. Also you can edit the settings of your drivers. Need Microsoft .Net Framework! (At the moment DriverUpdater search at google for drivers because there is no useable database.)
A program, or daemon for Linux, which convertes incoming joystick data to mouse data, so that you can use your joystick/joypad as a mouse device in X.org, gpm or any other program that needs mouse data (even games).
send and receive artnet / art-net, more than DMX over ethernet network
libartnet is a library for transferring Artnet data over the network. Artnet data is used for 1) receiving DMX values send by lightning consoles or DMX software 2) sending DMX data ... x) transfer firmware and more ... used in Artnet2MIDI, uDMXArtnet and most likely more applications. libartnet-win32 is based on a former version of libartnet that was only for *nix systems. The actual version of libartnet:
Program to monitor CPU and Motherboard Temperatures and Fan speed on ASUS motherboards; includes an alarm which notifies when the temperatures are too high.
This project is the conversion of the Comport Package of dejancrn and dybdahl, for lazarus pascal project. It just work on windows but in the future, I traduce it to work under lazarus for linux.
INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc).
LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.
BrickOS is an alternative software environment for the LEGO(r) Mindstorms Robotic Invention System. The intent is to allow developers to write C and/or C++ code for the RIS platform.
System Information Tool for Windows
Sysinfo is a comprehensive tool that provides detailed information about different sectors of your Windows machine. Once you open Sysinfo, it scans your machine and compiles different system information details. You can view information related to your processor, bios, operating system, hard drive, memory usage, optical drives, network adapters and more. Each of the sections provides some at-a-glance general information, but for each, the sector can be expanded allowing for a more in-depth look. Sysinfo also includes a section for battery details making it useful even for laptop users. In closing, Sysinfo is a truly easy to use resource for those that like to keep informed about all aspects of their machine. Thanks to MajorGeeks for this awesome description ;)
An attempt to write a driver for Canon CAPT-printers, including, but not limited to, LBP-2900. THIS PROJECT IS OUTDATED AND INACTIVE. The new and supported version is located at
CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.
Linux kernel driver for ThinkPad laptops
This is a Linux driver for ThinkPad laptops, written by Borislav Deianov and Henrique de Moraes Holschuh. It aims to support various features of these laptops which are accessible through a ThinkPad-specific ACPI framework. The newest version is available in the latest version of the Linux kernel.
Windows Software RAID Monitor
This little utility monitors the health of your Windows software RAID. It's based on Java, but can easily be called periodically from Windows task scheduler, and/or at system startup (configuration and batch file is included). WinRaidMonitor can send emails to a specified email address (supports SSL connections to SMTP server and user/password authentication).
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
Development of a driver and utilities to use 3Com ADSL Modem USB at Linux and Windows operating systems. Desarrollo de un driver y utilidades para utilizar el 3Com ADSL Modem USB en los sistemas operativos Linux y Windows.
A linux userspace device driver that allows joystick events to be remapped. Several joysticks can be combined into a single controller, and button/axes events can be remapped to new joystick, keyboard or mouse events. Advanced scripting also supported.
G-Workstation is an application for the Logitech G series written in C#. You can write you own small G15/G19 Applets with the scriptlanguage Lua.
wx200d is a weather station data collector and server daemon for the WX200, WM918, WMR918 and WMR968 weather station hardware.
This project is a WDM device driver to allow the XBox Controller, using an adapter, to be used on a PC running Windows 2000 or Windows XP.
E-Sport Drivers for the Razer Nostromo
Deprecated - please use Keyboarding Master: jnostromo provides drivers for the Razer Nostromo & Belkin N52/N52te designed to be E-Sport legal. Profiles are unique user defined keymappings and can be created for each game. Each profile can have up to 8 unique keymaps with mappings to switch between keymaps. jnostromo includes an easy to use configuration gui to map keys from the nostromo to the keyboard and/or mouse. The configuration gui can be hidden and at any time, the gui can be displayed by clicking on the system tray icon. Its the goal of this project to make jnostromo the driver of choice for E-Sports and competitive gamers! Version 1.5 Tutorial Video Note, version 1.5.2 has just been released (tarball) which includes an important bug fix. Before, holding down a key repeats the key, now the application only receives a single key when a key is held down.
libEPOS is a C library to control the EPOS motor control from maxon motor ( ) using a GNU/Linux system. This software is NOT from maxon motor, but was written from scratch by Marcus Hauser and others. The tar file is outdate
Workman and Workman for Programmers keyboard layout for PKL
Workman keyboard layout and Workman-P (Workman for Programmers) implemented for Portable Keyboard Layout (pkl.sourceforge.net).
K8055 User Interface is a Mac OS X based Cocoa application for controlling the Velleman K8055 USB interface. Included is a static library which can be used for developing other applications and closely replicates the Velleman Windows .DLL functions.
This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial
Temperature dependent overclock utility for AMD Phenom II BE processors, which provides functionality similar to Intel's Turbo Boost. .02 version mostly works with win7 (see forums).
CAN bus device driver
can4linux is hosted on since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO
Version 2 of the myFocuser Project
myFocuserPro2 is an ASCOM telescope focuser. Multiple options and driver boards supported. Not moon-lite compatible. 164,000+ file downloads. The most popular focuser project available. (c) Copyright Robert Brown 2014-2021. All Rights Reserved. Code or portions of code may not be copied or used without appropriate credit given to author. myFP2E WiFi - [myFP2 ESP32/ESP8266 focuser] myFP2N - Nextion touch screen display - 20NEXTION%20TFT%20DISPLAY/ Build a simple controller CONTRIBUTIONS Please help with the ongoing development of this project via PayPal to (Robert Brown). All contributions go towards development of this and other projects.
Install and update drivers on Windows PCs.
Snappy Driver Installer Origin is a portable Windows tool to install and update device drivers. It can be used offline to install drivers where Internet isn't available. The perfect technicians tool. Download the latest version from the home page below.
A command-line programmer for Atmel USB microcontrollers
A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at
A complete software solution for windows usb devices
libusbK is a complete driver/library solution for vendor class usb device interfaces. If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using Subversion is in Google Code.
GLDirect is the utility package for Windows 95/98/Me/2000/XP that enables OpenGL based games and applications to access 3D hardware acceleration through the Direct3D drivers provided by your graphics hardware manufacturer.
CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10 compile errors. increase status buffer size for newer printers that send larger status messages
TComPort by Dejan Crnila. Delphi/C++ Builder serial communications components. It is generally easy to use for basic Serial Communications purposes. Alternative to the TurboPower ASYNCPro at
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms
Airgo MIMO wireless card Linux driver. It's base on the Specs at . If it success, then Linux can support the AGN100 and the AGN300. You can get the newest development status from
Linux ALSA Driver for Alesis MultiMix8 USB2.0
*** Please e-mail ALESIS for a Linux driver for the MultiMix8 USB2.0 - maybe we can get them to provide one, or some sort of developer information! here's a link: *** Linux ALSA Driver for Alesis MultiMix8 USB2.0 mixer audio interface, capable of multichannel recording. Currently this project has pre-alpha/research status. Any help appreciated. :-)
Pilote de clavier français Azerty complété pour Windows
Ce pilote de clavier Azerty sous Windows permet d'écrire l'intégralité des caractères du français : majuscules accentuées, ligatures, touche morte accent aigu, et en particulier : É È Ç À Ù Ÿ œ Œ æ Æ, l'espace insécable, les cadratins, les symboles monétaires et commerciaux, fractions, symboles arithmétiques… Créé à partir de MSKLC de Microsoft avec l'option SGCaps, et conçu pour Windows NT4, 2000, Windows XP, Serveur 2003, Vista, Server 2008, Windows 7, 8, 10 en versions 32 bits et 64 bits, il permet une frappe à l'aveugle indifféremment en minuscules comme en majuscules. Deux versions sont fournies selon le choix de séparateur décimal sur le pavé numérique : le point ou la virgule. Il suffit de télécharger KbFr.zip. Il existe en outre une version portable, PKL, qui ne nécessite pas de droits d'administrateur lors de l'installation et qui est utilisable même à partir d'une clé USB. Il suffit de télécharger PKL-Fr.zip.
Disk Led Monitor and a very simple little program that shows the activity of the main hard drive using colored icons to place on the taskbar, to get an idea look at the image more of this page.
FlashWheel is a windows utility to allow the mouse wheel message to be sent to the window under the cursor instead of the active window.
Library for controling Vellman K8090 USB relay card under Linux
This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o)
GTK client for LCDproc. The screens are optimized for 20x4 alphanumeric LCD and Logitech G15 LCD. It can show CPU stats, memory stats network stats, Amarok/Audacious/Exaile track info, uptime , date, clock, disk space usage and emesene information.
This project will implement USB device drivers for the "OSR USB FX2 Learning Kit" device by Open Systems Resources Inc on several OSes. The intent it to allow USB driver developers compare & contrasts the different OS driver development environments.
Stylus-control provides a graphical interface for controlling nozzle checks, head cleaning and ink level of your Epson stylus printer. So it's planned to add new functionalities.
This is the PCMCIA device driver for the 1-2 mbit Frequency Hopping Symbol Spectrum24 WLAN card. We've also moved the 11 mbit Direct Sequencing code here. The 2.2.x and 2.4.x code trees have been merged.
Software driver for trialtuner dm800se
[Italiano] Addon per il driver del DVB-S2 del sunray (dm800se) per il supporto del triplo tuner (DVB-T e DVB-C). ATTENZIONE: le versioni "stabili" sono quelle pubblicate nella sezione download. I sorgenti si trovano nelle sotto-directory svn tags. La directory trunk del svn contiene la versione di sviluppo: può contenere codice non funzionante o non compilante. Utilizzarla solo per contribuire allo sviluppo. [English] DVB-S2 driver addon for sunray (dm800se), to activate the triple tuner (DVB-T and DVB-C). WARNING: "stable" versions are available for download. Their source codes are available under svn on sub-directories tags. Trunk dir contains unstable version: it may not work neither compile. Use this only to support development.
A spy for USB drives.
The application refers to track what happen with your computer USB ports by which USB drive and when. USB 007 can track it in your presence or absence. After inserting a removable disk such as Pen drive, Memory card, External hard disk etc. USB 007 will track the drive name, drive insertion date-time, drive space info and the file-folders (include hidden) that the drive contains. You will also get the updated info before the drive removed. The 4 more important features are that ♦ Enabling & Disabling options of USB ports. ♦ Track which files-folders are sent from/given to your computer. ♦ Track how much time the drive was connected to your computer. ♦ Observe (by reading only) if there is any virus in the drive, without open it.
Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.
Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.
Linux and Windows utillity for Agilent U1230, U1240 and U1270 DMM
Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A.
FreeNAS Temperature Report
FreeNAS Temperature Report is a small server program that provides temperature readings for your FreeNAS unit. Install this program in a jail on your FreeNAS, then use your web browser and go to to see your temperature readings. Installation instructions:
Note: The project has moved to The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.
MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on and code is maintained on
The Linux driver and control program for Sentelic's Finger-sensing Pad devices(STL3886/STL3888). The Finger-sensing Pad is a pointing device using PS/2 interface to communicate with PC or Laptop.
8051lib is a collection of easy-to-use C Functions and Assemble Languages Sets for the 8051 microcontroller. The Final Goal is to make the microcontroller developer focus on the Algorithms not the Hardware Drivers.
APC Biopod is a usb fingerprint sensor. This project provides linux driver for this device. Check for more projects!
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 104,000+ downloads. (c) Copyright Robert Brown 2014-2021. All Rights Reserved. Permission is granted for personal and Academic use only. Please contribute to the ongoing development of this project via PayPal and send the amount to user (Robert Brown). All contributions are gratefully accepted.
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
Use your favorite keyboard layout everywhere! I learned the Colemak keyboard layout, but I can not install at school, so I wrote a portable keyboard layout program in autohotkey. It no requires install or administrator privileges.
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
Roccat hardware support for Linux
This project will provide information and software to get hardware from the manufacturer Roccat to work under linux.
Allows control of fans in Apple computers in Windows and monitoring of temperatures. All Intel Macs supported + any conflicting programs are automatically closed and reopened. Project is no longer being actively developed. See forum for alternatives.
A simple Windows (.NET Framework) program which can be used to test whether the keys on a keyboard are functional.
Simple OS X app for viewing PCI hardware info
DPCIManager lists all of the PCI devices attached to your machine, along with their PCI IDs, vendor name, and device name. It will also retrieve the kext loaded for that device, important when troubleshooting. The new status tab gathers all of the most important info about your system into one place. ACPI table extraction makes it easy to edit your DSDT or other tables easily. Now includes ROM flashing.
Turn Off your Wireless Xbox 360 Controller on PC
This program have only one function. Double click it and all Xbox 360 Controllers will be turned off. Program have no dialogs or settings. It don't required administrator rights. It don't running as service or startup application, after turning off controller program will exit itself. You can add shortcut to desktop and configure hot key to turn off your controller. If you have Xbox One Controller, press X button for 10 seconds to turn off your controller.
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell. Find more information on
Based on tom and roland from wingmanteam work. This is a tool that log the usb data exchange between hardware and device driver!
Software control for the BitFenix Recon fan controller.
Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.
The Project represents the graphic interface of programmer for Atmel microcontrollers. Owing to flexible technology of plug-ins, the interface can be easily adapted for microcontrollers of new types. The project is written in Visual C ++ and the assembler
Utility to manage Intel AMT-aware devices
This utility is further development of Gerd Hoffmann's AMTTOOL. It now allows: remote power control with full sort of iAMT boot features; view general, audit, remote device's info; iAMT device network administration; get/sync the iAMT device's time; user access control management; list hardware asset; manipulation of Audit feature; change various security settings; manage iAMT power saving; setup redirection service; administer platform events logging and alerting by snmp traps.
WIFI-BOX Firmware for WRT54G(s), Hacked with Linksys's GPL source code, Add more futures for this Wireless Router... Updated: Now support for GS version and Asus WL-500GS...
Hardware information gathers application. Check the possibility to migrate this hardware to Linux or any other free software operating system.
The main product of this project, XMLProperties, extends the java.util.Properties class in order to allow inclusion of other properties files, extraction of Properties subsections, and an easier-to-manage file structure.
A set of OSGi bundles to integrate ZigBee networks with the OSGi Platform. They include drivers to access ZigBee USB dongles, implementation of the ZigBee Cluster Library specification, ZigBee Profiles, and tools.
Use your Android Device as a 3D mouse for PC
aMouse is a java develovep project. It uses Android devices accelerometer to move the mouse in your PC.
dgcusbdcp.ko is a pre-compiled kernel module for ASUS eeePC. It is needed to use this mini-laptop with Zoom 3095 V92 USB and other Conexant DGC (USB DCP) modems.
El kernel de Linux, la imaginacion ¿uso de la imaginación? El proyecto siempre tuvo la intención de centralizar datos. Una forma sencilla de agrupar la información de forma centralizada, accesible, y obviamente, de manera personal. Raúl Vilchez P.d se me olvidaba decir que esta es la segunda vez que subo 'la repo', por que alguien esta dedicido/a a frustrar mi trabajo. Menos mal que no es nada personal, jua, jua!
Linux driver for the tablet buttons of Fujitsu Siemens Tablet PCs (Lifebooks P-, T- and U-Series, Stylistic T and ST5xxx). * PLEASE NOTE: the latest release from this project is old and does not build anymore; the driver is maintained in the mainline kernel *
Userspace ANT protocol stack for Linux (Forerunner 310XT and others)
Garmin Forerunner 310XT ANT protocol data downloader/uploader. Waypoints, tracks, courses and fintess data. Output format is GPX. There is a possibility that it would support other devices like Garmin Edge series and other ANT FS devices.
In the field of Computer Hardware II learning from a live instructor-led and hand-on training courses would make a big difference as compared with watching a video learning materials. Participants must maintain focus and interact with the trainer for questions and concerns. In Qwikcourse, trainers and participants uses DaDesktop , a cloud desktop environment designed for instructors and students who wish to carry out interactive, hands-on training from distant physical locations.
For now, there are tremendous work opportunities for various IT fields. Most of the courses in Computer Hardware II is a great source of IT learning with hands-on training and experience which could be a great contribution to your portfolio.
Computer Hardware II Online Courses, Computer Hardware II Training, Computer Hardware II Instructor-led, Computer Hardware II Live Trainer, Computer Hardware II Trainer, Computer Hardware II Online Lesson, Computer Hardware II Education